IT

이름을 몰라도 SQL 기본 제약 조건을 삭제하는 방법은 무엇입니까?

lottoking 2020. 5. 15. 08:20
반응형

이름을 몰라도 SQL 기본 제약 조건을 삭제하는 방법은 무엇입니까?

Microsoft SQL Server에서 열에 대한 기본 제약 조건이 있는지 확인하고 기본 제약 조건을 삭제하는 쿼리는 다음과 같습니다.

IF EXISTS(SELECT * FROM sysconstraints
  WHERE id=OBJECT_ID('SomeTable')
  AND COL_NAME(id,colid)='ColName'
  AND OBJECTPROPERTY(constid, 'IsDefaultCnst')=1)    
ALTER TABLE SomeTable DROP CONSTRAINT DF_SomeTable_ColName

그러나 이전 버전의 데이터베이스에는 오타가 있으므로 제약 조건의 이름은 DF_SomeTable_ColName또는 일 수 있습니다 DF_SmoeTable_ColName.

SQL 오류없이 기본 제약 조건을 어떻게 삭제합니까? INFORMATION_SCHEMA 테이블에는 기본 제약 조건 이름이 표시되지 않으므로 조금 까다로워집니다.

따라서 '이 테이블 / 열의 기본 제약 조건 삭제 DF_SmoeTable_ColName' 또는 '삭제 '와 같은 것이지만 찾을 수 없으면 오류가 발생하지 않습니다.

다음 스크립트는 Mitch Wheat의 코드를 확장하여 구속 조건을 삭제하고 동적으로 실행하는 명령을 생성합니다.

declare @schema_name nvarchar(256)
declare @table_name nvarchar(256)
declare @col_name nvarchar(256)
declare @Command  nvarchar(1000)

set @schema_name = N'MySchema'
set @table_name = N'Department'
set @col_name = N'ModifiedDate'

select @Command = 'ALTER TABLE ' + @schema_name + '.[' + @table_name + '] DROP CONSTRAINT ' + d.name
 from sys.tables t
  join sys.default_constraints d on d.parent_object_id = t.object_id
  join sys.columns c on c.object_id = t.object_id and c.column_id = d.parent_column_id
 where t.name = @table_name
  and t.schema_id = schema_id(@schema_name)
  and c.name = @col_name

--print @Command

execute (@Command)

Rob Farley의 블로그 게시물이 도움이 될 수 있습니다.

다음과 같은 것 :

 declare @table_name nvarchar(256)
 declare @col_name nvarchar(256)
 set @table_name = N'Department'
 set @col_name = N'ModifiedDate'

 select t.name, c.name, d.name, d.definition
 from 
     sys.tables t
     join sys.default_constraints d on d.parent_object_id = t.object_id
     join sys.columns c on c.object_id = t.object_id
                           and c.column_id = d.parent_column_id
 where 
     t.name = @table_name
     and c.name = @col_name

나는 이것이 작동하고 조인을 사용하지 않는다는 것을 발견했다.

DECLARE @ObjectName NVARCHAR(100)
SELECT @ObjectName = OBJECT_NAME([default_object_id]) FROM SYS.COLUMNS
WHERE [object_id] = OBJECT_ID('[tableSchema].[tableName]') AND [name] = 'columnName';
EXEC('ALTER TABLE [tableSchema].[tableName] DROP CONSTRAINT ' + @ObjectName)

쿼리에서 정확히 일치하는 항목을 찾고 [columnName] 인 경우 아무 것도 반환하지 않으므로 columnName에 대괄호가 없는지 확인하십시오.

여러 열에 대한 제약 조건을 삭제하려면 

declare @table_name nvarchar(256)

declare @Command nvarchar(max) = ''

set @table_name = N'ATableName'

select @Command = @Command + 'ALTER TABLE ' + @table_name + ' drop constraint ' + d.name + CHAR(10)+ CHAR(13)
from sys.tables t
join sys.default_constraints d on d.parent_object_id = t.object_id
join sys.columns c on c.object_id = t.object_id
     and c.column_id = d.parent_column_id
where t.name = @table_name and c.name in ('column1','column2','column3')

--print @Command

execute (@Command)

확장 된 솔루션 (테이블 스키마 고려) :

-- Drop default contstraint for SchemaName.TableName.ColumnName
DECLARE @schema_name NVARCHAR(256)
DECLARE @table_name NVARCHAR(256)
DECLARE @col_name NVARCHAR(256)
DECLARE @Command  NVARCHAR(1000)

set @schema_name = N'SchemaName'
set @table_name = N'TableName'
set @col_name = N'ColumnName'

SELECT @Command = 'ALTER TABLE [' + @schema_name + '].[' + @table_name + '] DROP CONSTRAINT ' + d.name
 FROM sys.tables t   
  JOIN sys.default_constraints d       
   ON d.parent_object_id = t.object_id  
  JOIN sys.schemas s
        ON s.schema_id = t.schema_id
  JOIN    sys.columns c      
   ON c.object_id = t.object_id      
    AND c.column_id = d.parent_column_id
 WHERE t.name = @table_name
    AND s.name = @schema_name 
  AND c.name = @col_name

EXECUTE (@Command)

nvarchar (max) 임계 값에 대해 안전한 데이터베이스의 모든 기본 제약 조건을 삭제하십시오. 

/* WARNING: THE SAMPLE BELOW; DROPS ALL THE DEFAULT CONSTRAINTS IN A DATABASE */ 
/* MAY 03, 2013 - BY WISEROOT  */
declare @table_name nvarchar(128)
declare @column_name nvarchar(128)
declare @df_name nvarchar(128)
declare @cmd nvarchar(128) 

declare table_names cursor for 
 SELECT t.name TableName, c.name ColumnName
 FROM sys.columns c INNER JOIN
     sys.tables t ON c.object_id = t.object_id INNER JOIN
     sys.schemas s ON t.schema_id = s.schema_id
     ORDER BY T.name, c.name

     open table_names
fetch next from table_names into @table_name , @column_name
while @@fetch_status = 0
BEGIN

if exists (SELECT top(1) d.name from sys.tables t join sys.default_constraints d on d.parent_object_id = t.object_id join sys.columns c on c.object_id = t.object_id and c.column_id = d.parent_column_id where t.name = @table_name and c.name = @column_name)
BEGIN
    SET @df_name = (SELECT top(1) d.name from sys.tables t join sys.default_constraints d on d.parent_object_id = t.object_id join sys.columns c on c.object_id = t.object_id and c.column_id = d.parent_column_id where t.name = @table_name and c.name = @column_name)
    select @cmd = 'ALTER TABLE [' + @table_name +  '] DROP CONSTRAINT [' +  @df_name + ']'
    print @cmd
    EXEC sp_executeSQL @cmd;
END

  fetch next from table_names into @table_name , @column_name
END

close table_names 
deallocate table_names

다음 솔루션은 테이블에서 열의 특정 기본 제약 조건을 삭제합니다.

Declare @Const NVARCHAR(256)

SET @Const = (
              SELECT TOP 1 'ALTER TABLE' + YOUR TABLE NAME +' DROP CONSTRAINT '+name
              FROM Sys.default_constraints A
              JOIN sysconstraints B on A.parent_object_id = B.id
              WHERE id = OBJECT_ID('YOUR TABLE NAME')
              AND COL_NAME(id, colid)='COLUMN NAME'
              AND OBJECTPROPERTY(constid,'IsDefaultCnst')=1
            )
 EXEC (@Const)

모든 구속 조건을 찾아 보려면이 명령을 실행하십시오.

exec sp_helpconstraint 'mytable' --and look under constraint_name.

다음과 같이 보일 것입니다 : DF__Mytable__Column__[ABC123]. 그런 다음 제약 조건을 삭제하면됩니다.

여러 개의 기본 제약 조건이있는 열이 있으므로 다음 저장 프로 시저를 만듭니다.

CREATE PROCEDURE [dbo].[RemoveDefaultConstraints] @table_name nvarchar(256), @column_name nvarchar(256)
AS
BEGIN

    DECLARE @ObjectName NVARCHAR(100)

    START: --Start of loop
    SELECT 
        @ObjectName = OBJECT_NAME([default_object_id]) 
    FROM 
        SYS.COLUMNS
    WHERE 
        [object_id] = OBJECT_ID(@table_name) 
        AND [name] = @column_name;

    -- Don't drop the constraint unless it exists
    IF @ObjectName IS NOT NULL
    BEGIN
        EXEC ('ALTER TABLE '+@table_name+' DROP CONSTRAINT ' + @ObjectName)
        GOTO START; --Used to loop in case of multiple default constraints
    END
END
GO

-- How to run the stored proc.  This removes the default constraint(s) for the enabled column on the User table.
EXEC [dbo].[RemoveDefaultConstraints] N'[dbo].[User]', N'enabled'
GO

-- If you hate the proc, just get rid of it
DROP PROCEDURE [dbo].[RemoveDefaultConstraints]
GO

Useful for some columns that had multiple default constraints or check constraints created:

Modified https://stackoverflow.com/a/16359095/206730 script

Note: this script is for sys.check_constraints

declare @table_name nvarchar(128)
declare @column_name nvarchar(128)
declare @constraint_name nvarchar(128)
declare @constraint_definition nvarchar(512)

declare @df_name nvarchar(128)
declare @cmd nvarchar(128) 

PRINT 'DROP CONSTRAINT [Roles2016.UsersCRM].Estado'

declare constraints cursor for 
 select t.name TableName, c.name ColumnName, d.name ConstraintName, d.definition ConstraintDefinition
 from sys.tables t   
 join sys.check_constraints d  on d.parent_object_id = t.object_id  
 join sys.columns c  on c.object_id = t.object_id      
 and c.column_id = d.parent_column_id
 where t.name = N'Roles2016.UsersCRM' and c.name = N'Estado'

open constraints
fetch next from constraints into @table_name , @column_name, @constraint_name, @constraint_definition
while @@fetch_status = 0
BEGIN
    print 'CONSTRAINT: ' + @constraint_name
    select @cmd = 'ALTER TABLE [' + @table_name +  '] DROP CONSTRAINT [' +  @constraint_name + ']'
    print @cmd
    EXEC sp_executeSQL @cmd;

  fetch next from constraints into @table_name , @column_name, @constraint_name, @constraint_definition
END

close constraints 
deallocate constraints

I hope this could be helpful for whom has similar problem . In ObjectExplorer window, select your database=> Tables,=> your table=> Constraints. If the customer is defined on create column time, you can see the default name of constraint including the column name. then use:

ALTER TABLE  yourTableName DROP CONSTRAINT DF__YourTa__NewCo__47127295;

(the constraint name is just an example)

        declare @ery nvarchar(max)
        declare @tab nvarchar(max) = 'myTable'
        declare @qu nvarchar(max) = 'alter table '+@tab+' drop constraint '

        select @ery = (select bj.name from sys.tables as tb 
        inner join sys.objects as bj 
        on tb.object_id = bj.parent_object_id
        where tb.name = @tab and bj.type = 'PK')

        exec(@qu+@ery)

       **Take a look**

Always generate script and review before you run. Below the script

  select 'Alter table dbo.' + t.name + ' drop constraint '+ d.name  
  from sys.tables t
  join sys.default_constraints d on d.parent_object_id = t.object_id
  join sys.columns c on c.object_id = t.object_id
       and c.column_id = d.parent_column_id
  where c.name in ('VersionEffectiveDate','VersionEndDate','VersionReasonDesc')
  order by t.name

declare @table_name nvarchar(100)
declare @col_name nvarchar(100)
declare @constraint nvarchar(100)
set @table_name = N'TableName'
set @col_name = N'ColumnName'

IF EXISTS (select       c.*
    from        sys.columns c 
    inner join  sys.tables t on t.object_id = c.object_id
    where       t.name = @table_name
    and         c.name = @col_name) 
BEGIN

select @constraint=d.name
from 
sys.tables t
join sys.default_constraints d on d.parent_object_id = t.object_id
join sys.columns c on c.object_id = t.object_id
and c.column_id = d.parent_column_id
where 
t.name = @table_name
and c.name = @col_name

    IF LEN(ISNULL(@constraint, '')) <> 0
    BEGIN
        DECLARE @sqlcmd VARCHAR(MAX)
        SET @sqlcmd = 'ALTER TABLE ' + QUOTENAME(@table_name) + ' DROP CONSTRAINT' + 
        QUOTENAME(@constraint);
        EXEC (@sqlcmd);

    END

END
GO

참고URL : https://stackoverflow.com/questions/1430456/how-to-drop-sql-default-constraint-without-knowing-its-name

반응형

'IT' 카테고리의 다른 글

경로에서 File.separator와 슬래시의 차이점  (0) 2020.05.15
목록의 두 요소마다 반복  (0) 2020.05.15
스위프트 : iOS 화면 크기 결정  (0) 2020.05.15
UITableViewCell의 배경색을 사용자 정의하는 방법은 무엇입니까?  (0) 2020.05.15
UICollectionView의 셀 간격  (0) 2020.05.15

'IT'의 다른글

  • 현재글이름을 몰라도 SQL 기본 제약 조건을 삭제하는 방법은 무엇입니까?

관련글

댓글

티스토리툴바